Goulds VRS Vertical Rubber-Lined Cantilever Pumps

Product Description

The Goulds Model VRS builds on almost a century of cantilever and rubber-lined pump design experience. The VRS is designed using the proven reliability of the SRL and Goulds cantilever pumps. By using the existing SRL wet end components along with a rugged power end and shaft design, the VRS offers higher efficiencies, with maximum reliability and interchangeability. Offered in standard lengths and a wide variety of elastomers, the VRS provides you with the right pump for your application along with years of dependable service even under the worst operating conditions. 

Download Literature

Specifications

  • Sizes 2, 3, 5 & 6 inch (50, 75, 125 & 150 mm)
  • Flows to 1500 GPM (341 m3/h)
  • Heads to 120 feet (37m)
  • Solids to 1/4" (6 mm)
  • Pressures to 75 PSI (517 kPa)
  • Available in 4 ft. (1.2 m) length 
Design Features

Model Features

Available Elastomer for VRS Pumps
Available Elastomer for VRS Pumps 
Standard Features
Standard Features
Optional Features
  • Discharge pipe
  • Tailpipes for non-standard lengths
  • Stainer
  • Direct drive arrangment
  • Metal impellers
  • Range of elastomers

Applications

  • Mineral Processing 
  • Non-metallic mining 
  • Sand & Gravel 
  • Power Utility 
  • Pulp & Paper 
  • General Industry 
 


Goulds VRS Vertical Rubber-Lined Cantilever Pumps

Product Description

The Goulds Model VRS builds on almost a century of cantilever and rubber-lined pump design experience. The VRS is designed using the proven reliability of the SRL and Goulds cantilever pumps. By using the existing SRL wet end components along with a rugged power end and shaft design, the VRS offers higher efficiencies, with maximum reliability and interchangeability. Offered in standard lengths and a wide variety of elastomers, the VRS provides you with the right pump for your application along with years of dependable service even under the worst operating conditions. 

Download Literature
Specifications
  • Sizes 2, 3, 5 & 6 inch (50, 75, 125 & 150 mm)
  • Flows to 1500 GPM (341 m3/h)
  • Heads to 120 feet (37m)
  • Solids to 1/4" (6 mm)
  • Pressures to 75 PSI (517 kPa)
  • Available in 4 ft. (1.2 m) length 

    Available Elastomer for VRS Pumps

    Available Elastomer for VRS Pumps 

    Standard Features

    Standard Features

    Optional Features

    • Discharge pipe
    • Tailpipes for non-standard lengths
    • Stainer
    • Direct drive arrangment
    • Metal impellers
    • Range of elastomers
Applications
  • Mineral Processing 
  • Non-metallic mining 
  • Sand & Gravel 
  • Power Utility 
  • Pulp & Paper 
  • General Industry 
 
Hydraulic Coverage
View large image

    Parts & Service

    Parts & Service
    Parts and Service focused on reducing TCO and increasing plant output
    Learn more